Liquid cooling manifolds on a server rack
New launch

Data centre liquid cooling

Liquid Cooling Manifold

Square stainless steel manifolds that deliver coolant evenly to every server, rack after rack.

Our manifold range

  • Liquid cooling manifoldLiquid cooling manifoldData centres
  • Boiler manifoldBoiler manifoldHeating systems
  • Safety manifoldSafety manifoldBoiler safety
  • Neutral supportNeutral supportExpansion vessels
  • Boiler supportBoiler supportExpansion vessels
  • Stainless steel manifoldStainless steel manifold2 to 15-way
  • Powder-coated manifoldPowder-coated manifoldUS market
1.5 L+manifolds a year
12 barmax. operating pressure
DIN EN 12828safety standard
New launchLiquid Cooling Manifold
New launch · Data centre liquid cooling

Liquid Cooling Manifold

Square stainless steel manifolds that deliver coolant evenly to every server, rack after rack. Supplied as a supply and return pair for each rack, with the port count and spacing made to your drawing.

MaterialStainless steel
ProfileSquare section
PairSupply & return
ApplicationData centres
  • Square stainless steel profile
  • Even coolant flow to every server
  • Supply and return manifolds for each rack
  • Port count and spacing to customer drawing
Technical data
MaterialStainless steel
ProfileSquare section
ConfigurationSupply and return manifold pair per rack
ApplicationData centre liquid cooling
PortsCount, size and spacing to customer drawing
ProductBoiler Manifold
Article series MTL-BMV

Boiler Manifold

Compact manifold for 2 to 5 pump units. Flow and return run in separate chambers with thermal separation, so every heating circuit receives supply water at the intended temperature.

MaterialSS / Carbon steel
Pump units2 – 5
Max. pressure12 bar
MediumHeating water
  • For 2, 3, 4 or 5 pump units
  • Thermal separation of flow and return
  • Compact design for wall mounting
  • Available in stainless steel or carbon steel
Technical data
MaterialStainless steel (SS) / carbon steel
Surface finishCoated, black
Max. operating pressure12 bar
MediumHeating water
Pump units2, 3, 4 or 5
ThreadsG (ISO 228-1), Rp / R (EN 10226-1) or NPT on request
Boiler supportWall Console for Expansion Vessels
Article series MTL-WKS

Wall Console for Expansion Vessels

Wall console for mounting sanitary expansion vessels. Made from carbon steel with zinc plating, and available as a neutral support or as a boiler support for mounting next to the heat generator.

MaterialCarbon steel
FinishZinc plated
VersionsNeutral · Boiler
MountingWall, base plate
  • Carbon steel, zinc plated
  • Neutral support and boiler support versions
  • Wall-mounted with base plate
  • Keeps vessel weight off the pipework
Technical data
MaterialCarbon steel
Surface finishZinc plated
VersionsNeutral support, boiler support
MountingWall-mounted with base plate
ThreadsG (ISO 228-1), Rp / R (EN 10226-1) or NPT on request
Production partBoiler Safety Manifold
Article series MTL-BSM

Boiler Safety Manifold

Assembly unit for closed heating installations in accordance with DIN EN 12828. Galvanised steel body with 1" female thread connection, ready for an automatic air vent, pressure gauge and safety relief valve.

MaterialGalvanised steel
Connection1" female
Safety valve3.0 bar
StandardDIN EN 12828
  • Complies with DIN EN 12828
  • Ports for air vent, pressure gauge and safety valve
  • Three body versions
  • Zinc coating protects the body against corrosion
Technical data
Material / connectionGalvanised steel, 1" female thread
Air ventAutomatic air vent MV 10 R
Pressure gaugeMHR 63/4 – 3/8" with automatic shut-off valve
Safety relief valve3.0 bar
MediumHeating water, closed systems
Body versionsThree
ProductStainless Steel Manifold, 2- to 15-way
Article series MTL-SSM

Stainless Steel Manifold, 2- to 15-way

Manifold tube in stainless steel SS 304 with 2 to 15 outlets. The threaded outlet collars are part of the tube wall itself, giving a longer thread engagement without separate sockets.

MaterialSS 304
Outlets2 – 15
Max. pressure12 bar
Pressure test12 bar
  • Stainless steel SS 304 (1.4301)
  • 2-way to 15-way configurations
  • Threaded outlets in the tube wall
  • Custom lengths and pitches to drawing
Technical data
MaterialStainless steel SS 304 (1.4301)
Configurations2-way to 15-way
Max. operating pressure12 bar
Pressure testPneumatic, 12 bar
ProductPowder-Coated Manifold – US Market
Article series MTL-PCM

Powder-Coated Manifold – US Market

Steel manifold with a black powder-coated finish, developed for the US market. Outlets are arranged along the length of the tube, and the design can be adapted to NPT threads and inch dimensions.

MaterialSteel
FinishPowder coated, black
MarketUSA
ThreadsNPT possible
  • Black powder-coated finish
  • Designed for the US market
  • Inch dimensions and NPT threads possible
  • Custom lengths and outlet patterns
Technical data
MaterialSteel
Surface finishPowder coated, black
MarketUSA
Threads and dimensionsNPT threads and inch dimensions possible
Standards & certification

Made to the standards your market asks for

DIN EN 12828Heating systems in buildings, safety equipment
ISO 228-1G parallel pipe threads
EN 10226-1Rp / R pipe threads
ASME B1.20.1NPT threads for the US market
ISO 9001Quality management
ISO 14001 · 45001Environment, health & safety
How we work with you

From your drawing to series supply

Drawing & requirements review

We study the drawing, material, quantities and the standards your part must meet.

Manufacturing feasibility

Our engineers review how your part will be made and flag anything that saves cost.

Samples & first-article inspection

First parts are made on series tooling and measured against your drawing.

Customer approval

You approve the samples and the inspection report before series production starts.

Series supply

Planned production, checked at every station and packed for domestic or export dispatch.

Need a manifold to your own drawing?

Custom port layouts, threads, finishes and private label are available. Share your drawing and annual quantity.

Send an enquiry
Chat with us